1500M Full Blocking High Power Portable Drone Jammer

  • Composition: interception system host, charging power.
  • Portable design: imitation light weapons design, one hand or both hands gun shooting.
  • Regulatory model: in situ landing or returning to takeoff point.
  • The best remote-control distance: 1500 meters (covering the entire low open area).
  • Built-in high-capacity lighting, infrared laser, thermal imaging, night vision and other equipment to enhance performance after installation of rails.
  • Objective: remote control, GPS, GLONASS and 2.4G, 5.8G communication equipment.

This portable high-power drone signal jammer, can interfere all the satellite positioning signals, including GPS / Beidou / Glonass / Galileo, and shield the ISM 2.4G and ISM 5.8G frequency bands commonly used by drones / UAV like DJI and others brands with more than 1500 meters blocking radius. To jam the signals for UAV when flying or aerial, to cut off the signals between UAV and remote controller, to make the drones landing or return in right places, or hover, to avoid any accidents caused by UAV.


  • Protection of prohibited areas, such as: prison, military management area, national strategic resources projects, nuclear industry facilities, airports, political regions and etc.
  • To prevent the leakage of information on the scene, such as: major criminal cases on-site, urban management law enforcement scene, an important security venue, political protection, large-scale performance rehearsal, archaeological excavation site, large groups event site
  • To combat the use of unmanned aerial vehicles as a carrier of illegal activities, such as: transport / drug trafficking, smuggling, illegal goods or information transmission


Specifications of Drone Cabinet Jammer
ProjectPerformance Parameter 
Antenna3 built-in high gain omni-directional antennas 
Jamming objectiveAll types of drone, GPS, GLONASS 
Jamming frequencyCH1:GPS L1: 1560-1620MHz (Output Power: 10W)

CH2:2.4G Wi-Fi: 2400-2500MHz (Output Power: 10W)

CH3:5.8G Wi-Fi: 5725-5850MHz (Output Power: 10W)

Jamming distanceRadius: 200-1500 M 【covering the entire low open area】

The jamming radius depends on the strength signal in given area

Safety RegulationAC Adapter UL (E190582) / CSA (LR112971 Level 3) 
Jamming TypeSweep jamming 
Single output power≥+40dBm / +10W (±200mW) 
Total Output Power≥30W 
Working Power InputAC 110V 60Hz ~ AC 240V 50Hz / DC 27V 5000mAh built-in Li-ion battery 
Control Mode3 buttons control the 3 bands, can turn on/off each channel separately 
Trigger LifetimeMore than 100,000 times 
Dimension650(L)×95(W)×330(H)mm (not including antennas) 
Net Weight3.7kg 
Temperature of Working Environment-10 ℃ / +55 ℃ 
Temperature of Storage Environment-20 ℃ / +60 ℃ 



  • The jammers are customized according to the frequency bands of different countries, please confirm that the purchase country and the actual use country are consistent. Otherwise it cannot be used.
  • If the low power jammers (such as handheld jammers) to blocker high power signal device (such as high-power WIFI router, Bluetooth audio equipment, etc.), the effect will be poor or even cannot be jammed.
  • It is forbidden to use while charging.



  • Open the package, take out the drone jammer and its accessories carefully to avoid any damage.
  • Interfere with the remote control and image transmission signal, and turn on the 2.4G and 5.8G corresponding switches at the same time, pull down the trigger and hold it, make a sound of Didi, start to transmit the signal, and aim at the drone.
  • Interfere with satellites, remote control, and image transmission signals, turn on the GPS, 2.4G, and 5.8G corresponding switches at the same time, pull down the trigger and hold it, make a sound of Didi, and aim at the drone.
  • After use, turn off the GPS, 2.4G, 5.8G corresponding switches to prevent mis-operation from pulling the trigger; and turn off the battery voltage display switch also.
  • Charging: open the waterproof and dust-proof plug of the charging stand at the bottom of the battery compartment, and insert the charger plug into the charging port at the bottom of the battery compartment. The charger indicator light is red, indicating that it is charging; the charging is complete (or the charger is not plugged in) indicator light is on Green light.
  • Check the battery voltage: turn on the switch on the battery to display the battery voltage instantly; when the battery voltage is lower than 22V, even charging.



  • 1pc x drone jammer main unit
  • 1pc x charging cable